Thiết bị phát sóng Wi-Fi 6E Aruba AP-615 (R7J49A)
Giá bán: Liên hệ
Thông tin sản phẩm
R7J49A - Aruba AP-615 (RW) Dual-radio Tri-band 2x2:2 802.11ax Wi-Fi 6E Internal Antennas Campus AP.
Mô tả sản phẩm
Thiết bị phát sóng Wi-Fi 6E Aruba AP-615 (R7J49A)
- Tên sản phẩm: Wifi Aruba AP 615
- Hãng sản xuất: Aruba Network Inc - HPE
- Loại AP: Wifi 6E Indoor, tri-radio, 2.4GHz, 5GHz, 6GHz
- Chế độ hoạt động: Access Point
- Angten tích hợp: 2x2:2 SU-MIMO
- Cổng kết nối: E0 RJ45 2.5Gbps và nhận nguồn POE-PD, DC port 12Vdc, USB 2.0
- Bảo mật: WEP, WPA2-PSK, WPA-TKIP, WPA2 AES, WPA3
- Kiểu lắp đặt: chân đế ốp tường hoặc trần
- Phụ kiện đi kèm: sách hướng dẫn (không bao gồm bộ nguồn và mount kit)
- Hệ điều hành: ArubaOS và Aruba InstantOS 8.11.0.0
Thiết bị phát sóng Wi-Fi 6E Aruba AP-615 (R7J49A)
| Model | AP-615 (R7J49A) |
| Wi-Fi radio specifications | • AP type: Indoor, dual-radio/tri-band 2.4GHz, 5GHz and 6GHz (dual concurrent) 802.11ax 2x2 MIMO • 2.4GHz radio: Two spatial stream Single User (SU) MIMO for up to 574Mbps wireless data rate with 2SS HE40 802.11ax client devices (287Mbps for HE20) • 5GHz radio: Two spatial stream Single User (SU) MIMO for up to 1.2Gbps wireless data rate with 2SS HE80 802.11ax client devices • 6GHz radio: Two spatial stream Single User (SU) MIMO for up to 2.4Gbps wireless data rate with 2SS HE160 802.11ax client devices • Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 4 for the 6GHz radio) |
| Wi-Fi antennas | • Integrated downtilt omni-directional antennas for 2x2 MIMO with peak antenna gain of 2.8dBi in 2.4GHz, 4.5dBi in 5GHz and 4.5dBi in 6GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 to 40 degrees. |
| Other interfaces and features | • E0: Ethernet wired network ports (RJ-45) - Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX - 2.5Gbps speed complies with NBase-T and 802.3bz specifications - POE-PD: 48Vdc (nominal) 802.3af/at POE (class 3 or higher) - 802.3az Energy Efficient Ethernet (EEE) • DC power interface: 12Vdc (nominal, +/- 5%), accepts 2.1mm/5.5mm center-positive circular plug with 9.5mm length • USB 2.0 host interface (Type A connector) - Capable of sourcing up to 1A / 5W to an attached device • Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio - BLE: up to 5dBm transmit power (class 1) and -100dBm receive sensitivity (125kbps) - Zigbee: up to 5dBm transmit power and -97dBm receive sensitivity (250kbps) - Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 2.6dB • GNSS L1 (1575.42MHz) receiver supporting GPS, Galileo, GLONASS and BeiDou signals - Receive sensitivity: -162dBm (tracking) - Integrated omnidirectional antenna with roughly 30 to 40 degrees downtilt and peak gain of 2.3dBi • Advanced IOT Coexistence (AIC) allows concurrent operation of multiple radios in the 2.4GHz band • Built-in Trusted Platform Module (TPM) for enhanced security and anti-counterfeiting • Visual indicators (four multi-color LEDs): for System (1x) and Radio (3x) status • Reset button: factory reset, LED mode control (normal/off) • Serial console interface (proprietary, micro-B USB physical jack) • Kensington security slot • Automatic thermal shutdown and recovery function |
| Power sources and power consumption | • The AP supports direct DC power and Power over Ethernet (POE) on port E0 • When both DC and POE power sources are available, DC power takes priority over POE • Power sources are sold separately; see the 610 Series Ordering Guide for details • When powered by DC or 802.3at (class 4) POE, the AP will operate without restrictions. • When powered by 802.3af (class 3) POE with the IPM feature disabled, the AP will disable the USB port. • With IPM enabled, the AP will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable. • Maximum (worst-case) power consumption (without / with a USB device attached): - DC powered: 12.5W/18.2W. - POE powered: 14.7W/20.9W. - This assumes that up to 5W is supplied to the attached USB device. • Maximum (worst-case) power consumption in idle mode: 5.6W/11.0W (DC) or 6.9W/12.9W (POE). • Maximum (worst-case) power consumption in deep-sleep mode: 1.0W (DC) or 1.8W (POE). |
| Mechanical specifications | • Dimensions/weight (AP-615; unit without mount bracket): - 160mm (W) x 160mm (D) x 39mm (H) - 520g • Dimensions/weight (AP-615; shipping): - 212mm (W) x 194mm (D) x 66mm (H) - 800g |
| Environmental specifications | • Operating conditions - Temperature: 0C to +50C / +32F to +122F - Relative humidity: 5% to 95% - ETS 300 019 class 3.2 environments - AP is plenum rated for use in air-handling spaces • Storage conditions - Temperature: -25C to +55C / +13F to +131F - Relative humidity: 10% to 100% - ETS 300 019 class 1.2 environments • Transportation conditions - Temperature: -40C to +70C / -40F to +158F - Relative humidity: up to 95% - ETS 300 019 class 2.3 environments |
